Hp M277dw Scan Test Was Unsuccessful Try Again

Colour LaserJet MFP Pro 277dw: MFP will print but non scan since update Mac OS 10.10.5

I had used my LaserJet MFP Pro wireless without trouble for several years, with the Mavericks and Yosemite.  A few weeks ago a "update" the printer organisation is invisible.  After several hours of troubleshooting and to try five or six corrections, I finally got the printer online past using the IP address.

My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner.  Information technology'due south not a question of calculation - they do not to add information technology.  By HP support, I accept reset the system print and tried to offset over.  I downloaded HP Piece of cake Impress (or Like shooting fish in a barrel Start or any), which is the unabridged site of support in the fashion of software for the 277dw of the ACM.  The software through me the entire upward and congratulated himself for a task well washed, but my printer was not, in fact, related.  He appeared in the printers Command Panel, simply would not impress.  Just "connecting to printer" in the queue for ten minutes about until what I called off work.  And the scanner does not still show in the Image Capture, preview or HP Easy Scan.

And then, I went back to my previous prepare for the printer, apply the IP address.  Any ideas on how to get the scanner appears?

How-do-you-do

Restart your router by unplugging its power for 30 seconds.

One time it is fully up and you have internet admission on your Mac reboot both the HP printer and the Mac.

From system preferences, select Printers and scanners and click on the plus sign to add the printer again.

Can you now ee he listed as Hullo type or not?

HP Color Laserjet M277dw MFP: Cannot browse HP Color Laserjet MFP M277dw on Mac Os 10.6

Howdy, I can not browse to network bulldoze using the above mentioned printer. Browse to USB key is possible.

I downloaded the update (version 20160331) firmware image, merely impossible to install the program. After double click, nil happens. Whatsoever ideas?

Cheers and best regards

Christoph

Hi Christoph,

The printer is non uniform with Snow Leopard, it is supported on Lion (10.7) or afterwards versions.

You lot can find the organization requirements below:

http://support.HP.com/us-en/product/HP-Colour-LaserJet-Pro-MFP-M277-series/7089945/model/7089949/certificate/c04515051/

The update of the firmware utilitywas not desinged for your operating organisation and therefore does non work on it.

Every bit the connectewd printer to a network, follow these steps to update firmware directly from the bill of fare of the printer:

http://back up.HP.com/united states of america-en/product/HP-Colour-LaserJet-MFP-M277-series/7089945/model/7089949/document/c04517106/

If the implementation of scan to a shared binder on your grave down Mac, please specify the verbal error, and the parameters used (path of the shared folder used, etc.) too well washed you have shared this folder your Mac form?

scan to email on Colour LaserJet MFP M177fw Pro

I'chiliad trying to download the printable 'Scan to Email' on my Colour LaserJet MFP M177fw Pro, but he continues to throw an fault?

When I bought the printer (yesterday), I was told that I could put up to Scan in a certificate and have it automatically transport equally an east-postal service bulletin to a recipient.  How to achieve this?

Thank y'all!

Hi grahammccarthy,

Welcome to the HP Support forums.  I understand that yous want to know how to browse to email using your printer Laserjet Pro MFP M177fw.

Y'all don't mention the operating system that you use, so I've included links to all the operating systems supported on the way to clarify.  There is a section chosen "How to browse with HP software" and there you can discover a subsection entitled "How to scan to e-mail.  It is in the subsection, you lot will find the instructions y'all need to follow to be able to scan to electronic mail.

How to perform a browse: Windows XP

How to perform a scan: Windows Vista

How to perform a scan: Windows 7

How to perform a scan: Windows eight

How to perform a scan: Os 10 v10.8

How to perform a scan: Bone 10 v10.nine

Color Laserjet MFP M277DW Pro: scan to pdf corrupted

I use Nitro PDF, and every fourth dimension that I scan to PDF information technology is said the start folio was damaged and has been repaired.   Merely information technology is empty, no content on page 1. This will happen if I apply the shipper of record or the screen.  I just bought a new laptop, and there was this problem on my old laptop every bit well.  Scan to JPEG works but then have to have the extra step to convert the JPEG to PDF and it'southward a hassle.  Why the first page is always decadent?

Hello

Do you have installled of Adobe Reader on your PC? (fifty-fifty if non used as the default viewer)?

As y'all can find the organization requirements below, it is office of the configuration required to fill up use of the printer:

http://support.HP.com/us-en/product/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/document/c04515051/

Try to install it starting from the following link, then endeavor to scan the paradigm:

http://get.Adobe.com/reader/

Now try to open the file with Nitro PDF, if the aforementioned persists bank check if you tin come across a divergence with Adobe Reader.

Shlomi

Color LaserJet MFP M177fw Pro: Browse to Mac with Color LaserJet MFP M177fw Pro

I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

I take a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.ten.three

My question is the digitization. There is no selection for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

Summertime spend hours online to find an answer and is now well bored.

I have already reset the disc printing, verified and repaired systems. Can non scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of Os 10 prior to Yosemite?

I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can browse and airprint...

Is information technology possible to scan to a mac at all with this printer? Any help?

Hello @sa9494,

I see that you lot have issues with scanning. I will definitely practise my all-time to help y'all.

Check the proper noun of the driver that is installed by the printer. Brand sure that information technology shows just the name of the printer.
Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the proper noun of the printer on the left side and right side of the screen it should show the name of the printer. (Colour LaserJet MFP M177fw Pro)

If the total proper noun of the printer is not correctly, delete and add together the printer proper noun back from the list. Click on the sign - to remove the commuter and then click on the + sign to add the driver might take to drop-down listing to select the name of the printer to add a click.

Here is a screenshot of what it should look like. You have the scanning through top tab?

I have likewise included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

Scanning ports is non open on the router to the origin of this problem. You tin contact the router company to verify and to open up these ports 9220/9500/427 on the router.

Connect the printer with the USB cable, to run across if you have the same results.

Let me know.

If you capeesh my efforts, delight click on the "Thumbs up" button below.
If y'all have any questions, please let me know what steps you have taken and the results. Thank you.

LaserJet M3035xs MFP Scan because of the network folder

Hello. I had a question well-nigh the scan to network folder option on our M3035. At the same time, I had this put selection in place and works very well with all our Windows seven computers. The hard bulldoze in the Copier has failed and had to exist replaced that erased all our settings. I used the wizard to add folders to the copier to browse network and even though files test ok at installing any of my exam scans are appearing in the record. I was getting an error in a offset time on it is not unable to check access I went into the settings using the IP accost and added my credentials in this style. After this pace, I was able to scan, but nothing appears in the record. HP wants $1,000 to get out because nosotros are no longer under warranty.  Whatsoever aid that you can offer is greatly appreciated!

Sharon

Thank you for responding. My Info was valid and prepare the same manner it was before. I decided to have a different route and put all the files on the server through the server to scan and save. That seems to work for now.

Color LaserJet MFP M476nw: Could not resolve SMTP for the scanning functionality of email

Assist, delight!

I tried for days to get the browse to E-post feautre to piece of work and continue to become an error "Cannot resolve the SMTP server". I tried to use both @gmail.com and addresses @hotmail.com as a consequence of indications on each single post, that I could notice related to this topic on the forums of HP, making certain to try every possible combination of SMTP/SSL/Port according to the parameters indicated past each email provider (including this special setting "app not secure", that I need to activate information technology for Gmail) and NOTHING.

I utilize the spider web server HPs to set upwardly the configuration.

I'1000 drastic and offset a new postal service on the forums is my last resource earlier you lot put this printer to sleep.

Thanks in advance for the help!

How-do-you-do @jerefle

Try to practise the following

Upgrade the operating system on the printer (Firmware)

http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6457978&lang=en&cc=us#Z7_3054ICK0K8UDA0AQC11TA930O2

Select the operating arrangement and to choose the pick fimware run the application and ship the upgrade

Become to the printer and get the post-obit changes later on the upgrade

Implement > network > network services > IPV6 > Off

Implement > network > link speed > complete 100TX

Now of form at this stage you lot want to try to apply the office

His chest that we review a few moments so the way tea ready up was made, I thin

(The following data equally its dummy data has just develop my indicate)

For gmail, you can test with port 465, as well

For hotmail that you desire to apply smtp.live.com port 25 or 465

After this quick settings review if it does non then you lot desire to do this

On this Web page with the ip address that you're on become to network > identification identification network, save your chief and secondary DNS information, and then change to primary to viii.8.8.eight and 8.8.iv.4 secondary and examination again

HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n CONNECTED to THE NETWORK, SHOWS NO Cyberspace CONNECTION

HP Colour LaserJet M277n MFP printer, is connected to the network and I am able to impress and browse. During the attempt to get the HP Web Enable services in the Spider web services configuration folio, it displays an fault: "connection error, cheque the internet connexion".

Afterwards you enter the IP accost of the printer in the browser, I am able to find the printer. To enable printing of HP, but unable to do so finds out the in a higher place error. Tried a lot of things including re editing of. When I check the printer, information technology shows the proxy settings are required / incorrect, where, as confirmed past the supplier that they use the proxy server.

Assist, please.

Hello @JljoThomas!

Thanks for posting and welcome to the Forums of HP!

I understand that you have a problem of activation of the functionality of web services on your MFP HP LaserJet Pro M277n. I'd dear to help you with this.

Outset of all, you have the printer connected straight to a wall outlet or is a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you lot feel that this is non the example, please connect to a wall outlet so that nosotros can eliminate the source of energy as the main crusade. Problems when connected to an uninterruptible ability supply/Strip/surge protector power
In this document you will run into, QUESTION: questions or issues may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector
↑ This is not limited to the Laserjet printers.

If this does not resolve the effect, we are going to let the router and unplug the power cable (NOTE: exercise not reset the router...), and so do the same with the printer and close down the computer. Afterward a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

If y'all are all the same unable to connect to spider web services after trying these steps, we tin endeavor to set up a manual DNS server of your printer to connect to.

On the front panel of the printer, press the wireless icon. Select it wireless TO get the wireless summary. Do not your IP address.

i. on your computer, open up a Web browser and enter the IP address of the printer in the address bar. This volition bring up the embedded Web server (EWS) page.

2. at the top of the page, select Networking.

3. in the left side, select Identification network.

four. in article for DNS, under primary (IPv4) enter 8.eight.8.viii, nether secondary (IPv4) enter eight.eight.4.4.

5. Select Utilize at the bottom of the screen.

six. try to actuate the web services once again.

If it is still unable to connect, try to enter 209.244.0.iii for the principal (IPv4) and 209.244.0.4 for secondary (IPv4)

Hope this helps!

HP Color LaserJet MFP M277 Pro: LaserJet MFP M277dw announces its own wireless network

I but installed a new HP Color LaserJet M277dw MFP Pro and noticed that it creates its own network wireless with the proper name ' HP-Setup > LaserJet 5 c-277. Even if the WiFi is turned off.

I don't want the printer to make her presence known on WiFi and would like to know how I can turn this 'feature '.

What is this function? I couldn't notice any information near this in the manual, nor any of the settings of the printer where the name ' HP-Setup > LaserJet 5 c-277 "appears.

@seron

Ok...

Try irresolute the Direct wireless / activate - or combination is necessary to turn the setting and the close up with the 'off' setting / disabled.

In other words, no affair what the setting, Direct wireless can light upwardly.

Leave a few seconds betwixt the fourth dimension where as you lot toggle the setting.

If that does not hit on information technology free, toggle the setting and so turn the printer off for about 20 seconds and then plow on the printer.

When y'all meet a post that volition assistance yous,

Who inspires you, gives a cool idea,

Or you learn something new.

Click the 'Thumbs Up' on this mail service.

My respond-click accept as Solution to assistance others find answers.

Color LaserJet MFP M476 Pro: Scan to network folder

Finally decided to try to ready the scan to a folder over again... but run across the same issues as before... invalid proper noun and password

The printers and mac are on the same wireless network and have no trouble printing.

Using Macbook Pro running El Capitan ten.xi.6 - has only one user on mac... Bob

Not withal completed:

Folder created under users\Bob\Scan

Went to the settings and turned on file sharing and add the Scan file to the list of shared folders and make sure "Bob" is listed every bit a user with read/write privileges.

Page spider web accessible to 192.1.168.88 printer

Selected browse / file Configuration of the network

inpu the following parameters

Brandish name - Scan

Network path - \\192.168.1.94\Browse (confirmed this ip address is the ip address for the mac)

User name - Bob

PW - same as the one used to log for Mac (verified by up to 30 times!)

Continually go "user name or password is wrong. Make sure that the user name and password are right"

Any suggestions?

How-do-you-do

Equally long as you enable sharing of Windows files for the user the pritner volition not be able to connect because information technology but supports SMB.

By testing, I meet the user as bachelor for choice Although SMB is off...

By searching online, I do not see messages indicating you volition not be able to gear up in Windwos God file for the password iCloud user, may information technology be linked? :

https://discussions.Apple.com/thread/6708192?get-go=0 & tstart = 0

You can effort creating a new user account and fix information technology for this purpose (you won't even need this user to login, just prepare information technology to the printer while offering both users access to that folder, then you tin can continue to employ your electric current users).

Another thread indicate that change the password solved the problem:

https://discussions.Apple.com/thread/6629743?start=0 & tstart = 0

For whatever other questions, I suggest to start a thread at Apple Support communities, as long as yous won't solve this problem, the printer won't exist able to connect.

Please let me know any progress,

Shlomi

HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no issues with scan to folder network and internet connection.

I just bought a 277n MFP which I am running wireless. I accept problems with:

1 - the printer is connected to the internet (no problem connecting to the network and printing)

2 - definition of networks for scanning file (this is how this trouble started because I tried to update the firmware)

1.

Searched the forum and found some good articles. Tried to restart and modify the DNS every bit shown without success. Other means?

2. follow-up guide how to prepare an SMB shared folder, simply without success.

I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Fifty-fifty tried with the archway of my user proper noun and password. When I press 'save and test' I don't accept that "the examination failed. Try once more. »
Whatever suggestions?

Best regards

Johan

Hi @Johan84,

You lot can use DHCP or an IP fixed, only you will need to fix the DNS.

Disable the IPv6 setting on the printer.

Go to the printer settings.

Configuration of the network.

Network services.

IPv6.

Plough the ability off.

These steps should assist with scanning to email.

Let me know. Give thanks you.

Multi-folio scanning on Officejet Pro 8600 with bucket

I had to replace a process of multi HP 6400 series with HP Officejet Pro 8600. With the old software that he would ask if there was other pages when you lot employ the flatbed scanner option. I can't understand how to do this using the new software and it automatically creates the file after the one page. Any advice would exist appreciated.

Hullo

Y'all tin can scan multiple pages in the apartment glass using the HP scanning software.

Open the HP Officejet Pro 8600 software and click on the Scan option document or photo.

Select PDF, check the box show the preview and the resolution defined as 300 dpi or less.

Click a Browse and utilise the button Add Pages to add actress pages.

Shlomi

Multi-page scanning with Photosmart 3150 and Mavericks

I recently updated my OS from Mac to the Mavericks (OS 10.ix.ane).  Before this upgrade, my Photosmart C3150 printed and scanned exactly as I wanted.  I could scan a multiple page document and save it as a .pdf file successfully.

At present, when I browse a document of several folio and attempt to salve it in .pdf file, I go an error message that says: "an fault occurred registering the file because information technology could non be written in.  Check the backdrop of the file to ensure that it is not dead. »

I don't have this problem if my digital file is a unmarried page .pdf.  I tried to use the transport to preview or transport to the office, and the same problem occurs.  Sometimes when I effort this, the HP Scan, the application hangs and I have to utilize Force Quit to close (just not every time).

Really can't wait for scan documents several pages in private files, i folio.  Whatever other suggestions on how to overcome this problem?

HI RESJR,

Happy new year's day

You can open the analysis selection in organization preferences and analyze the many elements from there rather than using HP scanning.

1. Place the item you want to scan on the scanner glass, or load in the ADF (ADF) documents, if your printer has ane.

Cannot observe "advance settings" uncheck the box - want to be able to create multi-folio scans

I found an reply, only nosotros need to find a "accelerate settings" which - despite many enquiry - I tin't discover on my new iMac screen.  My printer is a Photosmart 309 and I just downloaded the current hp printer commuter.  I experience a flake silly.

Can anyone assistance?

Are you press scan on the printer?  I don't recommend that, but instead, click on the button Scan Image Capture.

sevignyfice1971.blogspot.com

Source: https://www.eehelp.com/question/multi-page-scan-to-e-mail-network-folder-on-dish-color-laserjet-mfp-pro-476dw/

Share this post